General Specification

General parameters for micro single stage thermoelectric modules

 

Basic Height Tolerance
Parallel Difference for Each Module
Length & Width Tolerance
Ceramic Plates
+ / – 0.15mm
+ / – 0.1mm
+ 0.4 / – 0.2mm
BK-100 (gray)
Micro single stage thermoelectric modules are manufactured metalized & soldered, Tsold=95ºC
SPECIAL CONDITIONS
Thermoelectric modules without wires;  without sealing; soldering temperature is 117ºC
Thermoelectric modules inb-8-0.45-1.3; inb-12-0.45-1.3; inb-18-0.45-1.3; inb-32-0.45-1.3 and inb-66-0.45-1.3 could be manufactured with Tmax=69ºC

 

Standard, high-effective and special single stage thermoelectric modules without metalization
 

Basic Height Tolerance
Parallel Difference for Each Module
Length & Width Tolerance
Ceramic Plate
+ / – 0.35mm
+ / – 0.025mm
+ 0.5 / – 0.2mm
BK-96(white) or BK-100(gray)
Standard, high-effective and special single stage thermoelectric modules are manufactured without metalization.
WIRES
By customers request or standard length is 120mm (stripping 5mm, tinning 5mm).
CERAMIC PLATES
Standard, high-effective & special single-stage thermoelectric modules are manufactured on hot and cold ceramic plates of equal sizes.

 

Multi-Stage Thermoelectric Modules
 

Basic Height Tolerance
Parellel Difference for Each Metalized Module
Length & Width Tolerance
Ceramic Plates
+ / – 0.3mm
+ / – 0.1mm
+ 0.5 / – 0.2mm
BK-100 (gray)

Work Temperature:

a. -150ºC to +85ºC
b.  -150ºC to +150ºC
c. -150ºC to +200ºC

Height Tolerance:   Standard is >0.1mm;  with special requirements, could be >0.02mm

Wire Length:            Standard is 150mm

Metalized TEC:

For Micro TEC and popular TEC, we can metalize the TEC ceramic surface for customers to solder sensors or temperature stabilizer direct to TEC surface.  Contact us for availability.

If you have any questions, Please call 1-818-288-4390 OR
You can also navigate directly to Quote Request.

Leave a Reply

Your email address will not be published. Required fields are marked *